Archives: Ultra Products

Post Type Description

Performance Rating: NMMA TC-W3, TC-WII, TC-W, API TC

Specially formulated to meet the critical requirements of the latest high performance, water-cooled two stroke engines. Dyed blue for ease of identification, it uses a high quality ashless additive package which provides enhanced lubrication and protection for the latest high performance outboard motors. May be used with both leaded and unleaded fuels.

Main Applications

  • Water-cooled outboard two stroke engines requiring NMMA TC-W3, TC-WII and TC-W type oils.
  • Air-cooled two-stroke engines requiring oil satisfying API TC specifications e.g. power saws, motorcycles, etc

Main Applications

  • Extended engine life
  • No gel formation when mixed with fuel
  • Superior anti-scuffing protection
  • Reduced spark plug fouling
  • Environmentally friendly, ensuring low aquatic toxicity.

Performance Rating: API TC

Ultra Two Stroke Motor Oil is a premium low ash lubricant, blended from refined hydro-treated base oils and an advanced additive package. It was formulated to impart high degrees of lubricity, detergency and dispersancy required for two stroke gasoline engines.

Performance Rating: API TC

  • Minimize spark plug fouling.
  • Minimize deposits on pistons, the combustion chamber, and exhaust parts.
  • Provide maximum protection against piston and cylinder wear and bearing corrosion

CP-1009-68 is a custom-blended highly refined, chemically inert, semi-synthetic lubricant. It contains additives for oxidation inhibition, corrosion protection, pour point depression, and defoaming. This fluid is widely used for applications where the lubricant is subjected to harsh chemical environments, such as the demanding conditions found in ammonia refrigeration applications.

CP-1542 Series are custom-blended polyalklene glycol (PAG)/ ester rotary screw air compressor lubricants. This formulation offers improved lubrication at high and low temperatures, reduced volatility, and high viscosity index, plus excellent corrosion protection. CP-1542 Series are long life lubricants formulated with rust and oxidation inhibitors. Other viscosities are available for specific applications.

CP-1542 will not leave behind carbon residue/varnish when it oxidizes as compared to hydrocarbon based products.

Turbo 4-32 is a custom-formulated lubricant specifically designed for long life under the severe, demanding conditions normally encountered in gas turbines and centrifugal compressors.

Turbo 4-32 combines the advantages of synthetic and restructured hydrocarbon oil which results in performance improvements beyond conventional mineral oils and many synthetic oils.

CP-9301-46 is a custom-blended semi-synthetic / synthetic air compressor lubricant. The lubricant has excellent lubrication properties at both high and low temperatures, low volatility, superior chemical inertness and hydrolytic stability. It is also compatible with mineral oils and equipment designed for use with both synthetic and mineral oils.

The combination of the high quality base oil and an advanced additive package gives CP 9301-46 in typical operating conditions of flooded screw compressors an 8000-hour life.

CP-4126-150 is a diester based synthetic lubricants specially formulated for rotary vane air compressor applications. Benefits of using these lubricants include:

  • Eliminate the formation of sludge, varnish and other deposits
  • Extended lubricant life
  • Superior demulsibility
  • Wide operating temperature range

CP-4608-100-F is a custom-blended polyalphaolefin (PAO) synthetic hydrocarbon oil giving improved lubrication at high and low temperatures, reduced volatility, and compatibility with mineral oils and equipment designed for use with mineral oils. They are formulated with additives for rust and oxidation inhibition and antiwear.

NSF H-1 registered for use in Federally inspected meat and poultry plants. Complies with FDA 32 CFR 178.3570- Lubricants with incidental food contact.

CP 4601 Series are custom-blended polyalphaolefin (PAO) synthetic hydrocarbon fluids giving improved lubrication at high and low temperatures, reduced volatility, and compatibility with mineral oils and equipment designed for use with mineral oils.

CP 4601 Series are long life lubricants formulated with rust and oxidation inhibitors. These oils are authorized by USDS for use in federally inspected meat and poultry plants with no possibility of food contact (H-2).

CP 1516 Series products are unique custom blend of polyalkylene glycols with additives for oxidation stability, corrosion protection, metal deactivation and lubricity. The ability of these lubricants to withstand dilution by hydrocarbon and other compressed gas is particularly advantageous in flooded screw compressors. Other advantages include stability, low ash content, high viscosity index and shear stability.